TABLE-TOP POWER SUPPLIES FOR MEDICAL AND INDUSTRIAL APPLICATIONS!
Out with it!
Put power supplies with detrimental side effects out the door once and for all!
Although detrimental side effects aren't listed in the product literature, we know them well: EMC problems and undesirable heat generation. External front-end solutions with only one output require internal DC/DC conversion, thus making EMC and cooling a major issue. But consider that changed forever!
For applications using more than one voltage and requiring extremely high reliability, designers can now count on ASTEC's new DPT multivoltage table-top power supplies!
The new 50W front-end devices feature a robust converter topology design that delivers high efficiency. The demonstrated MTBF of 550,000 hours even far outdistances the standard ratings for typical build-in devices.
The DPT's operating temperature rating of 0°C to +60°C ambient, including -20°C start-up guarantee, furthermore beats the standard competition among external power supplies.
|
|
With ASTEC's DPT family, CODICO delivers stand-alone listed power supplies in accordance with EN60950 and EN60601 for the supply of applications with a combined logic and motor drive requirement, mobile measuring instruments or, for example, medical laboratory and monitoring equipment.
The rated output voltages lie in the range of 3.3V to 24VDC, with a triple output current of 8A / 2.4A / 0.5A - provided that the maximum total power of 50W is adhered to. The 2-meter long output cable is equipped with a 5-Pin DIN connector. The AC input is via a 3-pin IEC320 (C14) receptacle with a green LED for signaling the presence of mains voltage in the rated range of 85 - 264VAC (47Hz - 440Hz) or 127-300VDC.
EMC limits are in compliance with EN55022"B" and immunity meets EN61000-4-2, -3, -4, -5, -6, -8 and -11 Level 3. International safety approvals according to UL/CSA, VDE/CB EN6950-1, UL/CSA60601-1 and VDE60601-1 enable the rapid and easy market introduction of your application worldwide. The ground leakage current of the medical DPT versions is rated at 275uA max. and the entire DPT series is equipped with internal self-resetting overvoltage and overpower protection.
Specifications:
Total Power: 30W - 50W
Input: universal 90VAC - 264VAC (47Hz-440Hz) // DC 127 - 300V
Temperature Range: (-20°C) 0° C
to 40°C (+60°C)
Output: 1-3x 3.3V ... 24VDC
Protection: overpower, short-circuit
and overvoltage
Safety Approvals: UL/CSA; VDE;
CB: IEC950-1/ 601
Design: 61mm x 133mm x 41mm
So, if you require a table-top power supply that matches the quality of build-in solutions, please don't hesitate to order samples and technical documentation from:
Michael Schrutka, EXT 31
|
