2015-03-23  Semiconductor ICs   

ATWINC1500 Wifi and ATWINC3400 WIFI/BLE Module

ATMEL offers new Wifi and BLE Modules which are precertified with a dedicated low power focus. The modules process the full network stack independent and can be connected to the application processor via a serial interface. They have been optimised for battery applications and work with input voltages of 1.8V to 3.6V by an consumption of only 4µA in standby.

ATMEL offers on one side the ATWINC1500 module, a IEEE 802.11 b/g/n IOT Network Controller which can be connected via UART or SPI and on the other side the ATWINC3400 module, which offers IEEE 802.11 b/g/n and BT 4.0 IOT together.

The interface here will be UART, SPI, I2C or SDIO. The ATWINC1500 modules are available and you can also request a full blown starter kit from CODICO. Please check the WINC1500-MR210PA datasheet.

Please don’t hesitate to contact Johannes Kornfehl.

Hide this

This website uses cookies in order to give you the best possible service. By using this website you comply with the use of cookies. Further information can be found here