2010-10-08  DINKLE

Too little space and too many component? No problem, thanks to space-saving solutions from DINKLE!

Introducing DINKLE’s new push-in terminal block series!

DINKLE’s new push-in terminal block series (0137-11, -12 and 0138-10, -11, -70, -76) offer space-saving solutions for pitches ranging from 2.54mm to 10mm, in straight, right-angle and 45° versions. To top it off, both series feature an elegant design.

Leaving nothing to be desired in the way of assembly options, DINKLE has also expanded the 0138 series with pin-in-paste components (0138-50 and -51 series). These solutions offer quick and easy connection, a high temperature range and both straight and right-angle versions.

Pluggable miniature terminal blocks– 0221-20xx and 0221-22xxTHT!

To further round out its portfolio of space-saving solutions, DINKLE now offers the 0221-20xx series of spring plugs and its matching counterpart, the 0221-22xxTHT (pin-in-paste/THR).

The spring plugs enable comfortable, tool-less assembly for terminating either single solid wires or wire strands.

Here, too, the PCB header is available in straight or right-angle versions, and in single or double-row configurations.

“Your buddy for drives” – ELK500/508!

The ELK500 and ELK508 series offer a UL rating of 300V and 13.5A (AWG14) at a height of only 10.60mm, making them the smallest/lowest screw terminal blocks on the market to carry such a rating. The integrated steel wire cage enables both series to withstand vibration and fluctuating temperatures.

DINKLE’s power PCB terminal blocks unite compact sizes and outstanding performance under one hat!

“THE” series – EPK!

The EPK series is comprised of single-piece, direct-mounted terminal blocks with a UL rating of 35A / 600V. Their single-piece design eliminates the need for a separate cable and PCB connector (since the entire EPK series combines both in one solution). It should also be mentioned that, among all 6.35mm-pitch terminal blocks available on the market, the EPK series includes the smallest screw-type terminal block with a 600V rating! Another advantage is the modular design, as this lets designers mix and match the screw terminal block components to fit the application requirements.

DINKLE’s power PCB solutions are offered in both spring and screw versions. Depending on the product, UL ratings of up to 115A, 1000V and AWG2 are available, which means there is a suitable solution for any application.

We would be pleased to provide you with additional information!


Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild14.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild13.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild10.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild9.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild8.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild7.jpg
Imp_2_2010_S11_DINKLE_Zu wenig Platz_Bild6.jpg
Hide this

This website uses cookies in order to give you the best possible service. By using this website you comply with the use of cookies. Further information can be found here