MURATA PS: A “POWER BREAK” for 3-Watt DC/DC Converters

2012-04-23  Power Supply Modules   

A new family of 3-watt isolated DC/DC converters breaks with traditional form factors. Despite being designed to meet heightened industrial demands, the MEE3 series from MURATA PS is able to pack its power into a SIP4 package, a form factor that previously met only 1W and 2W power requirements.

MEE3 versions are available immediately for a regulated input voltage of either 5V or 12V and offering the popular single output voltages of 5V, 9V, 12V, or 15V (DC). The fully encapsulated modules provide 1000VDC isolation and can deliver full power (without derating) throughout the operating temperature range of -40°C to +85°C. Typical efficiency is from 83% to 89%, depending on the version. With a switching frequency of 60kHz, technical implementation is via proprietary toroidal transformers. As “quasi unregulated” converters, the modules deliver a maximum output voltage deviation of 4% to 8% (depending on the type) for the entire specified range.

Type testing of the MEE3 series to UL/EN 60950 standards supports use in worldwide approved applications. Engineering responsibility for development through to the continuous monitoring of production processes, including 100% burn-in testing, lies with MURATA’s Milton Keynes site. The converters are produced entirely in MURATA’s own, newly equipped plant in China, thus ensuring a favorable price-performance ratio over the long run.

Overview of the MEE3 series:
- Power: 3 Watts
- Isolation: 1000V
- Operating Temperature: -40 to +85°C
- Package/Pinning: SIP4
- Input: 5V or 12V
- Output: 5V, 9V, 12V or 15V
- Max. Control Deviation: 4% to 8%
- Efficiency: 83% - 89%
- Safety: UL/CE 60950

We would be pleased to send you free testing samples and detailed information!

Hide this

This website uses cookies in order to give you the best possible service. By using this website you comply with the use of cookies. Further information can be found here