JETZT NEWSLETTER ABONNIEREN!
CODICO - YOUR DESIGN-IN COMPONENT COMPANY
  1. Products
  2.  > Sensors
  3.  > Gyro
Products | 

Gyro

30_Gyro_AKletr_603.jpg

Gyro is the designation applied to modules for the measurement of the rates of rotation of rotating bodies.

 

CODICO has a wide selection of high-precision products in the widest variety of design formats all on offer in the range.

Our suppliers in this category Gyro:

MURATA

MURATA is a global leader in the design, manufacture and supply of advanced electronic materials, leading edge electronic components, and multi-functional, high-density modules.

INFOContact

Your Contact:

Bild von Andreas Hanausek
Andreas Hanausek
Product Line Manager
+43 1 86305-131
Bild von Roland Trimmel
Roland Trimmel
Product Line Manager
+43 1 86305-144
Bild von Sebastian Gebhart
Sebastian Gebhart
Product Line Manager
+43 1 86305-205
Bild von Srecko Drazic
Srecko Drazic
Product Marketing Manager
+43 1 86305-104

SENSONOR

SENSONOR has for more than 25 years played a significant role in the development of the global MEMS industry. Over the years, more than 250 million pressure sensors, more than 250 million accelerometers, and more than 2 million gyros have been shipped to customers for use in numerous type of applications.

INFOSAMPLESContact

Your contact :

Bild von Johannes Kornfehl
Johannes Kornfehl
Product Marketing Manager
+43 1 86305-149

Gyro is the designation applied to modules for the measurement of the rates of rotation of rotating bodies. For a long time, optical-based modules were the only systems available for this, but today economical solutions are on offer that are based on MEMS sensors, which consist of silicon structures.

 

In MEMS gyros, the rates of rotation are determined by the Coriolis effect. Symmetrical structures made of silicon provide for stability and precision. These MEMS sensors function in each case for one axis, and are also provided with the evaluation electronics needed. This in turn means that nowadays modules are fitted with three sensors at once, one for each axial direction. If the module is also supplemented by acceleration sensors for each axis, then the term IMU (Inertial Measurement Unit) is used. In most cases, a corresponding digital circuit is also located in the module, and the data is issued to the central computer via a number of interfaces.

 

Codico has a wide selection of high-precision products in the widest variety of design formats all on offer in the range.

 

Murata: http://www.murata.com/en-eu/products/sensor? intcid5=com_xxx_xxx_cmn_nv_xxx

Sensonor: http://www.sensonor.com/gyro-products.aspx

This website uses cookies in order to give you the best possible service. By using this website you comply with the use of cookies.
Further information can be found here

Hide this