Language

KDS' High Accurate CMOS Crystal Oscillators

High accurate CMOS crystal oscillators DSO211SX and DSB211SJA from KDS.

DSO211SX and DSB211SJA

Check out the new KDS CMOS crystal oscillators DSO211SX (accurate type) and DSB211SJA (very accurate type) as future automotive timing clock. They are capable of operating over a wide temperature range from -40°C to +125°C.

The demand of high accurate CMOS crystal oscillator (XO) is increasing in the market. In the past, automotive timing devices demanded robustness as first priority. XO was not the best solution because of the sensitive internal oscillation IC. However, PCB sizes became smaller and smaller, with car electronic nodes get closer and closer. Now automotive applications need small size, accurate and robust XO for advanced applications. KDS DSO211SX and DSB211SJA will sure fit to those demands.

Key Features

KDS Product

DSO211SX

DSB211SJA

Size

2,0x1,6mm (max height 0,8mm)

2,0x1,6mm (max height 0,8mm)

Frequency

1MHz - 125MHz

13MHz - 52MHz (*)

Overall Frequency Stability (-30°C ~ +85°C

+/-30ppm

+/-2,5ppm

Overall Frequency Stability (-40°C ~ +105°C)

+/-50ppm

+/-5ppm

Overall Frequency Stability (-40°C ~ +125°C)

+/-50ppm

+/-20ppm

Supply Voltage

+1,8V~+3,3V

+1,8V~+3,3V

Output signal

CMOS

CMOS

Type

Standard

Very Accurate

*Currently limited frequencies are developed. Please check with us for more information.

 

DSO211SX has also a 2,5x2,0mm size lineup. Amazing thing is, KDS reached +/-50ppm in -40°C to +125°C range without temperature compensation like TCXO. This is due to “true” quartz crystal suppliers who produce synthetic quartz crystals with extremely high technology and experience.

DSB211SJA is using a temperature compensate IC. KDS reaches very low phase noise which other XO (crystal oscillator) suppliers or MEMS oscillators cannot reach.

Both items show the technology level of KDS. Also other automotive oscillators like differential output XO are part of KDS’s lineup.

 

Typical Applications:

  • On-board chargers
  • Rear view cameras
  • High resolution graphic processors
  • Other automotive applications

Your Contact Person

For more information, please contact Yasunobu Ikuno.

Yasunobu Ikuno is application engineer and product manager
Yasunobu Ikuno Product Manager +43 186 305-276 E-MAIL